6mm SAUM Improved Load Data & Reloading Guide

Rifle

Also known as: 6 SAUM Improved, 6mm SAUM AI, 6mm SAUM 40°

About 6mm SAUM Improved

The 6mm SAUM Improved is a wildcat cartridge derived from the 6mm Short Action Ultra Magnum (SAUM), itself a derivative of Remington's SAUM series introduced in the early 2000s. The "Improved" designation typically refers to changes made to the cartridge's shoulder angle and case dimensions to optimize ballistics performance. Improvements aim to maximize powder capacity and increase velocity while minimizing case stretch and brass wear.

In terms of technical characteristics, the 6mm SAUM Improved features a sharper shoulder angle of typically 40 degrees, which enhances headspace control and increases case capacity. This wildcat cartridge often necessitates custom dies for reloading, as it is not commercially available in factory ammunition. Reloaders benefit from carefully selecting components tailored for specific rifle barrels, maximizing accuracy and performance with specific loads.

The ballistic performance of the 6mm SAUM Improved is impressive, delivering higher velocities than standard SAUM cartridges. Reloaders typically choose bullet weights ranging from 95 to 115 grains, which are ideal for achieving a flat trajectory and high energy retention at extended ranges. Such characteristics make this cartridge favorable for long-range target shooting and varmint hunting.

From a practical standpoint, the 6mm SAUM Improved offers significant advantages for precision shooters and competitors. Its ability to deliver high velocity with relatively manageable recoil allows for rapid follow-up shots. The cartridge's design facilitates meticulous load development, providing reloaders with the opportunity to adjust variables to attain optimal performance tailored to their specific application, whether in sport or competitive shooting scenarios.

Technical Drawing

6mm SAUM Improved cartridge dimensions, C.I.P.L1 = 41.06 mm, L2 = 45.09 mm, L3 = 51.689 mm, L6 = 71.755 mmL1 = 41.06 mmL2 = 45.09 mmL3 = 51.69 mmL6 = 71.75 mm80.1°

Based on Wildcat, the max. allowed case length is 2.035 in / 51.69 mm, the max. cartridge length is 2.825 in / 71.75 mm, and the max. allowed pressure is 65,000 PSI / 4,482 bar.

Technical Specifications

Maximum Pressure:65000 PSI / 4482 bar
Case Volume:73 Grains of Water
Primer Size:Large Rifle (LR)
Safety Standard:Wildcat
Bore Area:29.57 mm²
Barrel Diameter:0.243" / 6.2 mm
L1:1.617" / 41.06 mm
L2:1.775" / 45.09 mm
L3:2.035" / 51.69 mm
L6:2.825" / 71.75 mm

Start Calculating to Develop your own Load Data for 6mm SAUM Improved

Use our professional ballistics calculator to develop safe and accurate load recipes for 6mm SAUM Improved.

Start Calculating

Standard Load Data — 6mm SAUM Improved

Select your desired cartridge and bullet weight below to access the corresponding load table. From there, you can choose any listed load recipe and transfer it directly into the ballistics calculator for further refinement, optimization, and precision tuning.

Frequently Asked Questions

The maximum pressure for 6mm SAUM Improved is 65,000 psi | 4,482 bar.

6mm SAUM Improved typically uses a Large Rifle (LR) primer.

The case capacity of 6mm SAUM Improved is approximately 73 grains of water (H₂O).