.300 Sherman Load Data & Reloading Guide

Rifle

Also known as: 300 Sherman, 30 Sherman

About .300 Sherman

The .300 Sherman is a modern wildcat cartridge developed to bridge the gap between the traditional .308 Winchester and the larger .300 Winchester Magnum in terms of performance and versatility. Originating from the desire for a cartridge that offers improved ballistics over the .308 while maintaining manageable recoil and efficient use in short-action rifles, the .300 Sherman combines innovative case design with optimized powder capacity. It has gained popularity among precision shooters and long-range hunters who value superior downrange performance paired with lighter recoil.

Technically, the .300 Sherman is based on a modified .30-06 Springfield parent case that has been shortened and necked down to accept a .30 caliber bullet. This modification results in a cartridge capable of firing bullets ranging from 150 to 220 grains, with a common sweet spot around the 180-grain mark for a balance of velocity and energy. With an overall length suitable for short-action rifles, the .300 Sherman allows for a broader selection of firearms compared to other magnum calibers.

Ballistically, the .300 Sherman offers impressive performance, capable of achieving muzzle velocities exceeding 2900 feet per second with a 180-grain bullet, delivering flat trajectories, and substantial energy transfer at long ranges. These characteristics make the cartridge ideal for both medium and large game hunting, and it is particularly favored by reloaders seeking to customize loads for specific shooting disciplines or environmental conditions.

For reloaders, the .300 Sherman presents several advantages, including a high degree of case robustness and powder capacity that can be finely tuned for a range of bullet weights and purposes. Reloaders appreciate the ability to experiment with various bullet types and powder combinations, achieving tailored ballistic performance without excessive barrel wear common with other high-velocity cartridges. This versatility enhances its appeal for enthusiasts committed to handloading precision.

Technical Drawing

.300 Sherman cartridge dimensions, C.I.P.L1 = 54.79 mm, L2 = 56.62 mm, L3 = 64.52 mm, L6 = 88.9 mmL1 = 54.79 mmL2 = 56.62 mmL3 = 64.52 mmL6 = 88.90 mm79.8°

Based on Wildcat, the max. allowed case length is 2.540 in / 64.52 mm, the max. cartridge length is 3.500 in / 88.90 mm, and the max. allowed pressure is 65,000 PSI / 4,482 bar.

Technical Specifications

Maximum Pressure:65000 PSI / 4482 bar
Case Volume:75.6 Grains of Water
Primer Size:Large Rifle (LR)
Safety Standard:Wildcat
Bore Area:47.45 mm²
Barrel Diameter:0.308" / 7.8 mm
L1:2.157" / 54.79 mm
L2:2.229" / 56.62 mm
L3:2.540" / 64.52 mm
L6:3.500" / 88.90 mm

Start Calculating to Develop your own Load Data for .300 Sherman

Use our professional ballistics calculator to develop safe and accurate load recipes for .300 Sherman.

Start Calculating

Standard Load Data — .300 Sherman

Select your desired cartridge and bullet weight below to access the corresponding load table. From there, you can choose any listed load recipe and transfer it directly into the ballistics calculator for further refinement, optimization, and precision tuning.

Frequently Asked Questions

The maximum pressure for .300 Sherman is 65,000 psi | 4,482 bar.

.300 Sherman typically uses a Large Rifle (LR) primer.

The case capacity of .300 Sherman is approximately 75.6 grains of water (H₂O).