.30 Nosler Load Data & Reloading Guide

Rifle

Also known as: .30 Nosler Magnum, 7.62×64mm Nosler

About .30 Nosler

The .30 Nosler, introduced in 2015 by Nosler Inc., emerged to fill the demand for a high-performance .30 caliber cartridge within the long-range shooting community. Designed as a modern alternative to the .308 Winchester and .30-06 Springfield, this cartridge utilizes a larger case capacity while being compatible with standard-length rifles. The goal was to enhance both velocity and ballistic performance, especially at extended ranges.

The .30 Nosler is built on a case with a length of 2.5 inches and a base diameter of .532 inches, accommodating a wide range of bullet weights from 150 to 215 grains. It boasts a typical muzzle velocity exceeding 3,000 feet per second with lighter projectiles, providing flat trajectories and reduced wind drift. Its design ensures optimal performance with modern high ballistic coefficient (BC) bullets, which contribute to impressive terminal performance on game.

In practical applications, the .30 Nosler excels in both hunting and precision shooting styles. The cartridge is well-suited for taking down medium to large game, such as elk and moose, while also being popular among competitive long-range shooters. The impressive energy retention and stable trajectory make it an excellent choice for shooters seeking to engage targets at significant distances.

For reloaders, the .30 Nosler offers several advantages, including a wide selection of premium bullets and powder options that allow for tailoring loads to specific needs. The ample case capacity provides room for experimentation with various powder types to optimize performance across multiple applications. This versatility and effectiveness make .30 Nosler a valuable addition to any reloader's arsenal.

Technical Drawing

.30 Nosler cartridge dimensions, C.I.P.L1 = 53.716 mm, L2 = 57.056 mm, L3 = 64.922 mm, L6 = 84.836 mmL1 = 53.72 mmL2 = 57.06 mmL3 = 64.92 mmL6 = 84.84 mm70.5°

Based on SAAMI, the max. allowed case length is 2.556 in / 64.92 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 65,000 PSI / 4,482 bar.

Technical Specifications

Maximum Pressure:65000 PSI / 4482 bar
Case Volume:99 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Safety Standard:SAAMI (Datasheet)
Bore Area:47.29 mm²
Barrel Diameter:0.308" / 7.8 mm
L1:2.115" / 53.72 mm
L2:2.246" / 57.06 mm
L3:2.556" / 64.92 mm
L6:3.340" / 84.84 mm

Start Calculating to Develop your own Load Data for .30 Nosler

Use our professional ballistics calculator to develop safe and accurate load recipes for .30 Nosler.

Start Calculating

Standard Load Data — .30 Nosler

Select your desired cartridge and bullet weight below to access the corresponding load table. From there, you can choose any listed load recipe and transfer it directly into the ballistics calculator for further refinement, optimization, and precision tuning.

All
125 gr
130 gr
145 gr
146.6 gr
147 gr
150 gr
165 gr
167 gr
168 gr
170 gr
172 gr
175 gr
180 gr
210 gr
220 gr

Frequently Asked Questions

The maximum pressure for .30 Nosler is 65,000 psi | 4,482 bar.

.30 Nosler typically uses a Large Rifle Magnum (LRM) primer.

The case capacity of .30 Nosler is approximately 99 grains of water (H₂O).