Load data for 7 mm-08 Rem. + 145gr Speer Hot-Cor

568 suitable loads across 98 powder(s) for cartridge 7 mm-08 Rem. with 145gr Speer Hot-Cor bullet.

The most recommended powders for this combination are Alliant Power Pro 2000-MR, ReloadSwiss RS 60 and ReloadSwiss RS 52.

Based on C.I.P., the max. allowed case length is 2.035 in / 51.69 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 60,191 PSI / 4,150 bar.

Based on C.I.P., the max. allowed case length is 2.035 in / 51.69 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 60,191 PSI / 4,150 bar.

Load Specifications

ImperialMetric

Bullet:.284 | 145gr | Hot-Cor

Cartridge:7 mm-08 Rem. load data

Case Length (L3):2.035" | 51.7 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.410" | 10.4 mm

Case Capacity:55 gow | 3.56 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (C.I.P.):60,191 psi | 4,150 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:1:13.0

Get PRO license to unlock all data and calculators

Community Loads for 7 mm-08 Rem. + 145gr Speer Hot-Cor

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

38.0 gr	2.730"	—	2527 fps	•••
42.0 gr	2.730"	—	2739 fps	•••

45.0 gr	2.730"	—	2406 fps	•••
•••	2.730"	—	2644 fps	•••

•••	2.730"	—	2642 fps	•••

•••	2.730"	—	2486 fps	•••
•••	2.730"	—	2747 fps	•••

•••	2.730"	—	2468 fps	•••
•••	2.730"	—	2696 fps	•••

•••	2.730"	—	2621 fps	•••

•••	2.730"	—	2524 fps	•••
•••	2.730"	—	2795 fps	•••

•••	2.730"	—	2668 fps	•••

•••	2.730"	—	2651 fps	•••

•••	2.730"	—	2566 fps	•••
•••	2.730"	—	2801 fps	•••

•••	2.730"	—	2687 fps	•••

•••	2.730"	—	2509 fps	•••
•••	2.730"	—	2730 fps	•••

•••	2.730"	—	2599 fps	•••

•••	2.730"	—	2498 fps	•••
•••	2.730"	—	2726 fps	•••

•••	2.730"	—	2561 fps	•••
•••	2.730"	—	2792 fps	•••

•••	2.730"	—	2492 fps	•••

•••	2.730"	—	2333 fps	•••

•••	2.730"	—	2683 fps	•••

•••	2.730"	—	2689 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.