Load data for .45-70 Govt. + 250gr Barnes TSX FN FB

18 suitable loads across 4 powder(s) for cartridge .45-70 Govt. with 250gr Barnes TSX FN FB bullet.

The most recommended powders for this combination are SNPE Vectan BA6 1/2, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Based on C.I.P., the max. allowed case length is 2.105 in / 53.47 mm, the max. cartridge length is 2.550 in / 64.77 mm, and the max. allowed pressure is 31,908 PSI / 2,200 bar.

Based on C.I.P., the max. allowed case length is 2.105 in / 53.47 mm, the max. cartridge length is 2.550 in / 64.77 mm, and the max. allowed pressure is 31,908 PSI / 2,200 bar.

Load Specifications

ImperialMetric

Bullet:.458 | 250gr | TSX FN FB

Cartridge:.45-70 Govt. load data

Case Length (L3):2.105" | 53.5 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.501" | 12.7 mm

Case Capacity:79 gow | 5.12 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (C.I.P.):31,908 psi | 2,200 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:Stabilizes in any common twist

Get PRO license to unlock all data and calculators

Community Loads for .45-70 Govt. + 250gr Barnes TSX FN FB

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

47.3 gr	2.525"	24.0"	1947 fps	•••

53.3 gr	2.525"	24.0"	2133 fps	•••

47.0 gr	2.525"	24.0"	2158 fps	•••

•••	2.515"	24.0"	2182 fps	•••

•••	2.520"	23.6"	2073 fps	•••
•••	2.520"	23.6"	2227 fps	•••

•••	2.520"	23.6"	1698 fps	•••

•••	2.550"	16.1"	1969 fps	•••
•••	2.550"	16.1"	2008 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.