Load data for .375 H&H Mag. + 260gr Nosler AccuBond
The most recommended powders for this combination are Alliant Reloder-15.
Based on C.I.P., the max. allowed case length is 2.850 in / 72.39 mm, the max. cartridge length is 3.600 in / 91.44 mm, and the max. allowed pressure is 62,366 PSI / 4,300 bar.
Based on C.I.P., the max. allowed case length is 2.850 in / 72.39 mm, the max. cartridge length is 3.600 in / 91.44 mm, and the max. allowed pressure is 62,366 PSI / 4,300 bar.
Load Specifications
ImperialMetric
Bullet:.375 | 260gr | AccuBond
Cartridge:.375 H&H Mag. load data
Case Length (L3):2.859" | 72.6 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.674" | 17.1 mm
Case Capacity:95.3 gow | 6.18 cm³
Primer Size:Large Rifle Magnum (LRM)
Max. Pressure (C.I.P.):62,366 psi | 4,300 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:6.0
Get PRO license to unlock all data and calculators
Community Loads for .375 H&H Mag. + 260gr Nosler AccuBond
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 69.0 gr | 3.575" | 24.0" | 2676 fps | ••• | |
| 71.0 gr | 3.575" | 24.0" | 2743 fps | ••• | |
| 76.0 gr | 3.575" | 24.0" | 2553 fps | ••• | |
| ••• | 3.575" | 24.0" | 2623 fps | ••• | |
| ••• | 3.575" | 24.0" | 2588 fps | ••• | |
| ••• | 3.575" | 24.0" | 2654 fps | ••• | |
| ••• | 3.575" | 24.0" | 2601 fps | ••• | |
| ••• | 3.575" | 24.0" | 2669 fps | ••• | |
| ••• | 3.575" | 24.0" | 2681 fps | ••• | |
| ••• | 3.575" | 24.0" | 2728 fps | ••• | |
| ••• | 3.575" | 24.0" | 2630 fps | ••• | |
| ••• | 3.575" | 24.0" | 2701 fps | ••• | |
| ••• | 3.575" | 24.0" | 2771 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.