.45 S&W Schofield Load Data & Reloading Guide
Also known as: .45 Schofield, .45 S&W, .45 Smith & Wesson
About .45 S&W Schofield
The .45 Smith & Wesson, better known as the .45 Schofield, is a rimmed, straight-walled revolver cartridge introduced in 1875 for the Smith & Wesson Model 3 Schofield revolver adopted by the U.S. Army. It is shorter than the .45 Colt (1.100 in case length versus 1.285 in) and has a larger rim, which allowed reliable extraction from the break-top Schofield.
It fires .452 in bullets, traditionally 230 to 250 grains at roughly 700 to 750 fps, at a modest SAAMI pressure level. Today it is popular in cowboy action shooting because it shoots well in .45 Colt revolvers with milder recoil.
For reloaders the small case is efficient with fast pistol powders, uses large pistol primers and standard .45 Colt dies. Loads must stay within the low pressure limits suitable for historic revolvers.
Technical Drawing
Based on SAAMI, the max. allowed case length is 1.100 in / 27.94 mm, the max. cartridge length is 1.430 in / 36.32 mm, and the max. allowed pressure is 14,504 PSI / 1,000 bar.
Technical Specifications
Start Calculating to Develop your own Load Data for .45 S&W Schofield
Use our professional ballistics calculator to develop safe and accurate load recipes for .45 S&W Schofield.
Start CalculatingStandard Load Data — .45 S&W Schofield
Select your desired cartridge and bullet weight below to access the corresponding load table. From there, you can choose any listed load recipe and transfer it directly into the ballistics calculator for further refinement, optimization, and precision tuning.
.452 | 230gr | LEE Mold TL452-230-TC
.454 | 277gr | NOE Bullet Molds SWC PB BD4
.452 | 252gr | LEE Mold 452-252-SWC
.454 | 256gr | NOE Bullet Molds SWC PB AD4
.4515 | 240gr | Sierra Sports Master
.452 | 180gr | Rim Rock RNFP Cowboy
.454 | 252gr | NOE Bullet Molds WC PB AC5
.454 | 285gr | NOE Bullet Molds RF GC BM6
.452 | 234gr | NOE Bullet Molds RF BB BI2
.452 | 160gr | LEE Mold 452-160-RF
.452 | 278gr | NOE Bullet Molds RF PB BP6
.454 | 251gr | NOE Bullet Molds SWC HB BD4
.452 | 200gr | Rim Rock RNFP Top Shelf
.451 | 230gr | Nosler FMJ
.452 | 250gr | Target Bullets FPPB
.452 | 200gr | H&N KS HS
.452 | 230gr | X-TREME RP HP
.452 | 225gr | ACME RNFP COATED
.451 | 250gr | Rim Rock RNFP
.451 | 200gr | Rim Rock SWC Top Shelf
.452 | 201gr | NOE Bullet Molds RN PB AM6
.451 | 200gr | Lehigh Defense Extreme Penetrator
.452 | 280gr | Matt's Bullets SWC
.452 | 230gr | X-TREME RN
Frequently Asked Questions
The maximum pressure for .45 S&W Schofield is 14,504 psi | 1,000 bar.
.45 S&W Schofield typically uses a Large Pistol (LP) primer.
The case capacity of .45 S&W Schofield is approximately 30 grains of water (H₂O).