Load data for 6 mm Rem. + 100gr Nosler Partition
The most recommended powders for this combination are Alliant Reloder-19.
Based on C.I.P., the max. allowed case length is 2.233 in / 56.72 mm, the max. cartridge length is 2.825 in / 71.76 mm, and the max. allowed pressure is 62,366 PSI / 4,300 bar.
Based on C.I.P., the max. allowed case length is 2.233 in / 56.72 mm, the max. cartridge length is 2.825 in / 71.76 mm, and the max. allowed pressure is 62,366 PSI / 4,300 bar.
Load Specifications
ImperialMetric
Bullet:.243 | 100gr | Partition
Cartridge:6 mm Rem. load data
Case Length (L3):2.223" | 56.5 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.516" | 13.1 mm
Case Capacity:54.4 gow | 3.53 cm³
Primer Size:Large Rifle (LR)
Max. Pressure (C.I.P.):62,366 psi | 4,300 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:10.0
Get PRO license to unlock all data and calculators
Community Loads for 6 mm Rem. + 100gr Nosler Partition
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 42.0 gr | 2.770" | 24.0" | 2852 fps | ••• | |
| 44.0 gr | 2.770" | 24.0" | 2982 fps | ••• | |
| 46.0 gr | 2.770" | 24.0" | 3112 fps | ••• | |
| ••• | 2.770" | 24.0" | 2880 fps | ••• | |
| ••• | 2.770" | 24.0" | 3015 fps | ••• | |
| ••• | 2.770" | 24.0" | 3151 fps | ••• | |
| ••• | 2.800" | 24.0" | 3041 fps | ••• | |
| ••• | 2.770" | 24.0" | 2798 fps | ••• | |
| ••• | 2.770" | 24.0" | 2965 fps | ••• | |
| ••• | 2.770" | 24.0" | 2759 fps | ••• | |
| ••• | 2.770" | 24.0" | 2883 fps | ••• | |
| ••• | 2.770" | 24.0" | 3007 fps | ••• | |
| ••• | 2.770" | 24.0" | 2901 fps | ••• | |
| ••• | 2.770" | 24.0" | 2884 fps | ••• | |
| ••• | 2.770" | 24.0" | 3003 fps | ••• | |
| ••• | 2.770" | 24.0" | 2865 fps | ••• | |
| ••• | 2.770" | 24.0" | 2988 fps | ••• | |
| ••• | 2.770" | 24.0" | 2932 fps | ••• | |
| ••• | 2.770" | 24.0" | 3074 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.