Load data for 6 mm Creedmoor + 90gr Nosler AccuBond

568 suitable loads across 99 powder(s) for cartridge 6 mm Creedmoor with 90gr Nosler AccuBond bullet.

The most recommended powders for this combination are ReloadSwiss RS 60, IMR 7828 SSC and ReloadSwiss RS 70.

Based on SAAMI, the max. allowed case length is 1.920 in / 48.77 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 62,001 PSI / 4,275 bar.

Based on SAAMI, the max. allowed case length is 1.920 in / 48.77 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 62,001 PSI / 4,275 bar.

Load Specifications

ImperialMetric

Bullet:.243 | 90gr | AccuBond

Cartridge:6 mm Creedmoor load data

Case Length (L3):1.920" | 48.8 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.355" | 9.0 mm

Case Capacity:51.5 gow | 3.34 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (SAAMI):62,001 psi | 4,275 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:1:9.0

Get PRO license to unlock all data and calculators

Community Loads for 6 mm Creedmoor + 90gr Nosler AccuBond

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

45.5 gr	2.675"	24.0"	2933 fps	•••
47.5 gr	2.675"	24.0"	3079 fps	•••
49.5 gr	2.675"	24.0"	3230 fps	•••

•••	2.675"	24.0"	2900 fps	•••
•••	2.675"	24.0"	3041 fps	•••
•••	2.675"	24.0"	3179 fps	•••

•••	2.675"	24.0"	2931 fps	•••
•••	2.675"	24.0"	3069 fps	•••
•••	2.675"	24.0"	3209 fps	•••

•••	2.675"	24.0"	2626 fps	•••
•••	2.675"	24.0"	2775 fps	•••
•••	2.675"	24.0"	2927 fps	•••

•••	2.675"	24.0"	2776 fps	•••
•••	2.675"	24.0"	2917 fps	•••
•••	2.675"	24.0"	3060 fps	•••

•••	2.675"	24.0"	2597 fps	•••
•••	2.675"	24.0"	2743 fps	•••
•••	2.675"	24.0"	2892 fps	•••

•••	2.675"	24.0"	2752 fps	•••
•••	2.675"	24.0"	2897 fps	•••
•••	2.675"	24.0"	3044 fps	•••

•••	2.675"	24.0"	2854 fps	•••
•••	2.675"	24.0"	2987 fps	•••
•••	2.675"	24.0"	3119 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.