Load data for 6.8 mm Rem. SPC + 100gr Nosler AccuBond
The most recommended powders for this combination are Hodgdon Benchmark.
Based on C.I.P., the max. allowed case length is 1.687 in / 42.84 mm, the max. cartridge length is 2.260 in / 57.40 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.
Based on C.I.P., the max. allowed case length is 1.687 in / 42.84 mm, the max. cartridge length is 2.260 in / 57.40 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.
Load Specifications
ImperialMetric
Bullet:.277 | 100gr | AccuBond
Cartridge:6.8 mm Rem. SPC load data
Case Length (L3):1.690" | 42.9 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.495" | 12.6 mm
Case Capacity:34 gow | 2.20 cm³
Primer Size:Large Rifle (LR)
Max. Pressure (C.I.P.):58,740 psi | 4,050 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:12.0
Get PRO license to unlock all data and calculators
Community Loads for 6.8 mm Rem. SPC + 100gr Nosler AccuBond
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 24.5 gr | 2.245" | 20.0" | 2604 fps | ••• | |
| 25.5 gr | 2.245" | 20.0" | 2693 fps | ••• | |
| 27.5 gr | 2.245" | 20.0" | 2675 fps | ••• | |
| ••• | 2.245" | 20.0" | 2607 fps | ••• | |
| ••• | 2.245" | 20.0" | 2419 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.