Load data for 6.5 mm Rem. Mag. + 140gr Nosler AccuBond
The most recommended powders for this combination are Alliant Reloder-19.
Based on C.I.P., the max. allowed case length is 2.170 in / 55.12 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 63,092 PSI / 4,350 bar.
Based on C.I.P., the max. allowed case length is 2.170 in / 55.12 mm, the max. cartridge length is 2.800 in / 71.12 mm, and the max. allowed pressure is 63,092 PSI / 4,350 bar.
Load Specifications
ImperialMetric
Bullet:.264 | 140gr | AccuBond
Cartridge:6.5 mm Rem. Mag. load data
Case Length (L3):2.170" | 55.1 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.738" | 18.7 mm
Case Capacity:68 gow | 4.41 cm³
Primer Size:Large Rifle (LR)
Max. Pressure (C.I.P.):63,092 psi | 4,350 bar
Barrel Length:26.0" | 660 mm
Min. Twist Rate:1:9.0
Get PRO license to unlock all data and calculators
Community Loads for 6.5 mm Rem. Mag. + 140gr Nosler AccuBond
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 56.5 gr | 2.800" | 24.0" | 2959 fps | ••• | |
| 51.5 gr | 2.800" | 24.0" | 2861 fps | ••• | |
| 53.5 gr | 2.800" | 24.0" | 2885 fps | ••• | |
| ••• | 2.800" | 24.0" | 2989 fps | ••• | |
| ••• | 2.800" | 24.0" | 2845 fps | ••• | |
| ••• | 2.800" | 24.0" | 2804 fps | ••• | |
| ••• | 2.800" | 24.0" | 2867 fps | ••• | |
| ••• | 2.800" | 24.0" | 2727 fps | ••• | |
| ••• | 2.800" | 24.0" | 2826 fps | ••• | |
| ••• | 2.800" | 24.0" | 2924 fps | ••• | |
| ••• | 2.800" | 24.0" | 2936 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.