Load data for 6.5 Creedmoor + 130gr CutEdge MTH

574 suitable loads across 101 powder(s) for cartridge 6.5 Creedmoor with 130gr CutEdge MTH bullet.

The most recommended powders for this combination are Alliant Reloder-17, ReloadSwiss RS 60 and Alliant Power Pro 2000-MR.

Based on C.I.P., the max. allowed case length is 1.920 in / 48.77 mm, the max. cartridge length is 2.825 in / 71.76 mm, and the max. allowed pressure is 63,092 PSI / 4,350 bar.

Based on C.I.P., the max. allowed case length is 1.920 in / 48.77 mm, the max. cartridge length is 2.825 in / 71.76 mm, and the max. allowed pressure is 63,092 PSI / 4,350 bar.

Load Specifications

ImperialMetric

Bullet:.264 | 130gr | CutEdge MTH

Cartridge:6.5 Creedmoor load data

Case Length (L3):1.920" | 48.8 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.526" | 13.4 mm

Case Capacity:52.5 gow | 3.40 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (C.I.P.):63,092 psi | 4,350 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:1:8.5

Get PRO license to unlock all data and calculators

Community Loads for 6.5 Creedmoor + 130gr CutEdge MTH

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Powder	Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

	45.0 gr	2.825"	24.0"	2736 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.