Load data for .44 Rem. Mag. + 200gr X-TREME RNFP HP

160 suitable loads across 28 powder(s) for cartridge .44 Rem. Mag. with 200gr X-TREME RNFP HP bullet.

The most recommended powders for this combination are Vihtavuori N105, Winchester AutoComp and ADI AP 100.

Based on C.I.P., the max. allowed case length is 1.285 in / 32.64 mm, the max. cartridge length is 1.610 in / 40.89 mm, and the max. allowed pressure is 40,611 PSI / 2,800 bar.

Based on C.I.P., the max. allowed case length is 1.285 in / 32.64 mm, the max. cartridge length is 1.610 in / 40.89 mm, and the max. allowed pressure is 40,611 PSI / 2,800 bar.

Load Specifications

ImperialMetric

Bullet:.429 | 200gr | RNFP HP

Cartridge:.44 Rem. Mag. load data

Case Length (L3):1.275" | 32.4 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.243" | 6.2 mm

Case Capacity:39.5 gow | 2.56 cm³

Primer Size:Large Pistol Magnum (LPM)

Max. Pressure (C.I.P.):40,611 psi | 2,800 bar

Barrel Length:6.0" | 152 mm

Min. Twist Rate:Stabilizes in any common twist

Get PRO license to unlock all data and calculators

Community Loads for .44 Rem. Mag. + 200gr X-TREME RNFP HP

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

12.0 gr	1.610"	16.5"	1453 fps	•••
13.5 gr	1.610"	16.5"	1542 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.