Load data for .44 Rem. Mag. + 200gr LEE Mold 429-200-RF

183 suitable loads across 31 powder(s) for cartridge .44 Rem. Mag. with 200gr LEE Mold 429-200-RF bullet.

The most recommended powders for this combination are Vihtavuori N105, Accurate 4100 and ADI AP 100.

Based on C.I.P., the max. allowed case length is 1.285 in / 32.64 mm, the max. cartridge length is 1.610 in / 40.89 mm, and the max. allowed pressure is 40,611 PSI / 2,800 bar.

Load Specifications

ImperialMetric

Bullet:.429 | 200gr | Mold 429-200-RF

Cartridge:.44 Rem. Mag. load data

Case Length (L3):1.275" | 32.4 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.299" | 7.6 mm

Case Capacity:39.5 gow | 2.56 cm³

Primer Size:Large Pistol Magnum (LPM)

Max. Pressure (C.I.P.):40,611 psi | 2,800 bar

Barrel Length:6.0" | 152 mm

Min. Twist Rate:Stabilizes in any common twist

Get PRO license to unlock all data and calculators

Community Loads for .44 Rem. Mag. + 200gr LEE Mold 429-200-RF

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Powder	Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

	27.0 gr	1.610"	16.0"	1969 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.