Load data for .338 Lapua Mag. + 250gr Nosler Partition RN
The most recommended powders for this combination are Vihtavuori N560.
Based on C.I.P., the max. allowed case length is 2.724 in / 69.20 mm, the max. cartridge length is 3.681 in / 93.50 mm, and the max. allowed pressure is 60,916 PSI / 4,200 bar.
Based on C.I.P., the max. allowed case length is 2.724 in / 69.20 mm, the max. cartridge length is 3.681 in / 93.50 mm, and the max. allowed pressure is 60,916 PSI / 4,200 bar.
Load Specifications
ImperialMetric
Bullet:.338 | 250gr | Partition RN
Cartridge:.338 Lapua Mag. load data
Case Length (L3):2.724" | 69.2 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.524" | 13.3 mm
Case Capacity:114 gow | 7.39 cm³
Primer Size:Large Rifle Magnum (LRM)
Max. Pressure (C.I.P.):60,916 psi | 4,200 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:15.5
Get PRO license to unlock all data and calculators
Community Loads for .338 Lapua Mag. + 250gr Nosler Partition RN
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 86.0 gr | 3.540" | 26.0" | 2650 fps | ••• | |
| 88.0 gr | 3.540" | 26.0" | 2710 fps | ••• | |
| 90.0 gr | 3.540" | 26.0" | 2767 fps | ••• | |
| ••• | 3.540" | 26.0" | 2651 fps | ••• | |
| ••• | 3.540" | 26.0" | 2706 fps | ••• | |
| ••• | 3.540" | 26.0" | 2760 fps | ••• | |
| ••• | 3.540" | 26.0" | 2664 fps | ••• | |
| ••• | 3.540" | 26.0" | 2724 fps | ••• | |
| ••• | 3.540" | 26.0" | 2781 fps | ••• | |
| ••• | 3.540" | 26.0" | 2604 fps | ••• | |
| ••• | 3.540" | 26.0" | 2661 fps | ••• | |
| ••• | 3.540" | 26.0" | 2718 fps | ••• | |
| ••• | 3.540" | 26.0" | 2816 fps | ••• | |
| ••• | 3.540" | 26.0" | 2875 fps | ••• | |
| ••• | 3.540" | 26.0" | 2934 fps | ••• | |
| ••• | 3.540" | 26.0" | 2631 fps | ••• | |
| ••• | 3.540" | 26.0" | 2689 fps | ••• | |
| ••• | 3.540" | 26.0" | 2749 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.