Load data for .338 Lapua Mag. + 200gr Nosler AccuBond
The most recommended powders for this combination are Alliant Reloder-19.
Based on C.I.P., the max. allowed case length is 2.724 in / 69.20 mm, the max. cartridge length is 3.681 in / 93.50 mm, and the max. allowed pressure is 60,916 PSI / 4,200 bar.
Based on C.I.P., the max. allowed case length is 2.724 in / 69.20 mm, the max. cartridge length is 3.681 in / 93.50 mm, and the max. allowed pressure is 60,916 PSI / 4,200 bar.
Load Specifications
ImperialMetric
Bullet:.338 | 200gr | AccuBond
Cartridge:.338 Lapua Mag. load data
Case Length (L3):2.724" | 69.2 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.484" | 12.3 mm
Case Capacity:114 gow | 7.39 cm³
Primer Size:Large Rifle Magnum (LRM)
Max. Pressure (C.I.P.):60,916 psi | 4,200 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:14.5
Get PRO license to unlock all data and calculators
Community Loads for .338 Lapua Mag. + 200gr Nosler AccuBond
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 93.0 gr | 3.580" | 26.0" | 2924 fps | ••• | |
| 95.0 gr | 3.580" | 26.0" | 2988 fps | ••• | |
| 90.0 gr | 3.580" | 26.0" | 2914 fps | ••• | |
| ••• | 3.580" | 26.0" | 2918 fps | ••• | |
| ••• | 3.580" | 26.0" | 2859 fps | ••• | |
| ••• | 3.580" | 26.0" | 2923 fps | ••• | |
| ••• | 3.580" | 26.0" | 2987 fps | ••• | |
| ••• | 3.580" | 26.0" | 2799 fps | ••• | |
| ••• | 3.580" | 26.0" | 2865 fps | ••• | |
| ••• | 3.580" | 26.0" | 2931 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.