Load data for .30-06 Spring. + 200gr Hornady ELD-X

528 suitable loads across 98 powder(s) for cartridge .30-06 Spring. with 200gr Hornady ELD-X bullet.

The most recommended powders for this combination are Alliant Power Pro 2000-MR, IMR 4350 and ReloadSwiss RS 60.

Based on C.I.P., the max. allowed case length is 2.494 in / 63.35 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.

Based on C.I.P., the max. allowed case length is 2.494 in / 63.35 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.

Load Specifications

ImperialMetric

Bullet:.308 | 200gr | ELD-X

Cartridge:.30-06 Spring. load data

Case Length (L3):2.494" | 63.3 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.739" | 18.8 mm

Case Capacity:68.2 gow | 4.42 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (C.I.P.):58,740 psi | 4,050 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:1:10.5

Get PRO license to unlock all data and calculators

Community Loads for .30-06 Spring. + 200gr Hornady ELD-X

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

48.5 gr	3.340"	24.0"	2385 fps	•••
50.0 gr	3.340"	24.0"	2451 fps	•••
50.1 gr	3.340"	24.0"	2454 fps	•••

•••	3.340"	24.0"	2477 fps	•••

•••	3.290"	24.0"	2552 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.