Load data for .30-06 Spring. + 165gr CutEdge MTH

570 suitable loads across 95 powder(s) for cartridge .30-06 Spring. with 165gr CutEdge MTH bullet.

The most recommended powders for this combination are ReloadSwiss RS 60, Alliant Power Pro 2000-MR and ReloadSwiss RS 52.

Based on C.I.P., the max. allowed case length is 2.494 in / 63.35 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.

Based on C.I.P., the max. allowed case length is 2.494 in / 63.35 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.

Load Specifications

ImperialMetric

Bullet:.308 | 165gr | CutEdge MTH

Cartridge:.30-06 Spring. load data

Case Length (L3):2.494" | 63.3 mm

Cartridge Length (COL/L6):•••

Seated Depth:0.559" | 14.2 mm

Case Capacity:68.2 gow | 4.42 cm³

Primer Size:Large Rifle (LR)

Max. Pressure (C.I.P.):58,740 psi | 4,050 bar

Barrel Length:24.0" | 610 mm

Min. Twist Rate:1:11.5

Get PRO license to unlock all data and calculators

Community Loads for .30-06 Spring. + 165gr CutEdge MTH

Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.

Charge (gr)	C.O.L.	Barrel Length	Velocity (fps)	Pressure (psi)

58.0 gr	3.340"	24.0"	2913 fps	•••

52.0 gr	3.340"	24.0"	2641 fps	•••
55.0 gr	3.340"	24.0"	2785 fps	•••

•••	3.340"	24.0"	2805 fps	•••

•••	3.340"	24.0"	2569 fps	•••

Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.