Load data for .280 Rem. + 168gr Nosler AccuBond Long Range
The most recommended powders for this combination are Alliant Reloder-22.
Based on C.I.P., the max. allowed case length is 2.540 in / 64.52 mm, the max. cartridge length is 3.330 in / 84.58 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.
Based on C.I.P., the max. allowed case length is 2.540 in / 64.52 mm, the max. cartridge length is 3.330 in / 84.58 mm, and the max. allowed pressure is 58,740 PSI / 4,050 bar.
Load Specifications
ImperialMetric
Cartridge:.280 Rem. load data
Case Length (L3):2.540" | 64.5 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.740" | 18.8 mm
Case Capacity:67.9 gow | 4.40 cm³
Primer Size:Large Rifle (LR)
Max. Pressure (C.I.P.):58,740 psi | 4,050 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:9.5
Get PRO license to unlock all data and calculators
Community Loads for .280 Rem. + 168gr Nosler AccuBond Long Range
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 44.0 gr | 3.300" | 26.0" | 2490 fps | ••• | |
| 46.0 gr | 3.300" | 26.0" | 2586 fps | ••• | |
| 48.0 gr | 3.300" | 26.0" | 2681 fps | ••• | |
| ••• | 3.300" | 26.0" | 2494 fps | ••• | |
| ••• | 3.300" | 26.0" | 2595 fps | ••• | |
| ••• | 3.300" | 26.0" | 2697 fps | ••• | |
| ••• | 3.300" | 26.0" | 2533 fps | ••• | |
| ••• | 3.300" | 26.0" | 2633 fps | ••• | |
| ••• | 3.300" | 26.0" | 2734 fps | ••• | |
| ••• | 3.300" | 26.0" | 2532 fps | ••• | |
| ••• | 3.300" | 26.0" | 2622 fps | ••• | |
| ••• | 3.300" | 26.0" | 2709 fps | ••• | |
| ••• | 3.300" | 26.0" | 2574 fps | ••• | |
| ••• | 3.300" | 26.0" | 2529 fps | ••• | |
| ••• | 3.300" | 26.0" | 2621 fps | ••• | |
| ••• | 3.300" | 26.0" | 2712 fps | ••• | |
| ••• | 3.300" | 26.0" | 2596 fps | ••• | |
| ••• | 3.300" | 26.0" | 2701 fps | ••• | |
| ••• | 3.300" | 26.0" | 2804 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.