Load data for .28 Nosler + 140gr Nosler AccuBond
The most recommended powders for this combination are Norma 217.
Based on SAAMI, the max. allowed case length is 2.590 in / 65.79 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 65,000 PSI / 4,482 bar.
Based on SAAMI, the max. allowed case length is 2.590 in / 65.79 mm, the max. cartridge length is 3.340 in / 84.84 mm, and the max. allowed pressure is 65,000 PSI / 4,482 bar.
Load Specifications
ImperialMetric
Bullet:.284 | 140gr | AccuBond
Cartridge:.28 Nosler load data
Case Length (L3):2.590" | 65.8 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.520" | 13.2 mm
Case Capacity:97 gow | 6.29 cm³
Primer Size:Large Rifle Magnum (LRM)
Max. Pressure (SAAMI):65,000 psi | 4,482 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:1:11.0
Get PRO license to unlock all data and calculators
Community Loads for .28 Nosler + 140gr Nosler AccuBond
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 82.0 gr | 3.340" | 26.0" | 3307 fps | ••• | |
| 84.0 gr | 3.340" | 26.0" | 3377 fps | ••• | |
| 80.0 gr | 3.340" | 26.0" | 3286 fps | ••• | |
| ••• | 3.340" | 26.0" | 3358 fps | ••• | |
| ••• | 3.340" | 26.0" | 3328 fps | ••• | |
| ••• | 3.340" | 26.0" | 3411 fps | ••• | |
| ••• | 3.340" | 26.0" | 3219 fps | ••• | |
| ••• | 3.340" | 26.0" | 3300 fps | ••• | |
| ••• | 3.340" | 26.0" | 3438 fps | ••• | |
| ••• | 3.340" | 26.0" | 3104 fps | ••• | |
| ••• | 3.340" | 26.0" | 3183 fps | ••• | |
| ••• | 3.340" | 26.0" | 3224 fps | ••• | |
| ••• | 3.340" | 26.0" | 3303 fps | ••• | |
| ••• | 3.340" | 26.0" | 3382 fps | ••• | |
| ••• | 3.340" | 26.0" | 3150 fps | ••• | |
| ••• | 3.340" | 26.0" | 3206 fps | ••• | |
| ••• | 3.340" | 26.0" | 3284 fps | ••• | |
| ••• | 3.340" | 26.0" | 3224 fps | ••• | |
| ••• | 3.340" | 26.0" | 3300 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.