Load data for .24 Nosler + 55gr Nosler Varmageddon HP
The most recommended powders for this combination are Alliant Reloder-7.
Based on Wildcat, the max. allowed case length is 1.600 in / 40.64 mm, the max. cartridge length is 2.260 in / 57.40 mm, and the max. allowed pressure is 55,000 PSI / 3,792 bar.
Based on Wildcat, the max. allowed case length is 1.600 in / 40.64 mm, the max. cartridge length is 2.260 in / 57.40 mm, and the max. allowed pressure is 55,000 PSI / 3,792 bar.
Load Specifications
ImperialMetric
Bullet:.243 | 55gr | Varmageddon HP
Cartridge:.24 Nosler load data
Case Length (L3):1.600" | 40.6 mm
Cartridge Length (COL/L6):•••
Seated Depth:0.105" | 2.7 mm
Case Capacity:31.5 gow | 2.04 cm³
Primer Size:Small Rifle (SR)
Max. Pressure (Wildcat):55,000 psi | 3,792 bar
Barrel Length:24.0" | 610 mm
Min. Twist Rate:Stabilizes in any common twist
Get PRO license to unlock all data and calculators
Community Loads for .24 Nosler + 55gr Nosler Varmageddon HP
Real loads for this combination shared by our community. Charge weights are only fully visible with an active Pro licence.
| Powder | Charge (gr) | C.O.L. | Barrel Length | Velocity (fps) | Pressure (psi) |
|---|---|---|---|---|---|
| 27.0 gr | 2.160" | 24.0" | 3075 fps | ••• | |
| 28.0 gr | 2.160" | 24.0" | 3189 fps | ••• | |
| 29.0 gr | 2.160" | 24.0" | 3306 fps | ••• | |
| ••• | 2.160" | 24.0" | 3054 fps | ••• | |
| ••• | 2.160" | 24.0" | 3168 fps | ••• | |
| ••• | 2.160" | 24.0" | 3279 fps | ••• | |
| ••• | 2.160" | 24.0" | 3043 fps | ••• | |
| ••• | 2.160" | 24.0" | 3151 fps | ••• | |
| ••• | 2.160" | 24.0" | 3258 fps | ••• | |
| ••• | 2.160" | 24.0" | 2977 fps | ••• | |
| ••• | 2.160" | 24.0" | 3090 fps | ••• | |
| ••• | 2.160" | 24.0" | 3204 fps | ••• | |
| ••• | 2.160" | 24.0" | 3117 fps | ••• | |
| ••• | 2.160" | 24.0" | 3230 fps | ••• | |
| ••• | 2.160" | 24.0" | 3339 fps | ••• | |
| ••• | 2.160" | 24.0" | 3024 fps | ••• | |
| ••• | 2.160" | 24.0" | 3136 fps | ••• | |
| ••• | 2.160" | 24.0" | 3242 fps | ••• | |
Charge weights beyond the first rows and all pressure values are only visible with an active Pro licence.