.45 Blaser Load Data & Reloading Guide

Rifle

Also known as: .45 Blaser RWS, .45 Blaser Magnum, .45 Blaser Express

About .45 Blaser

The .45 Blaser is a relatively new cartridge, introduced in the early 2000s by the German company Blaser. Designed primarily for use in bolt-action rifles as well as combination guns, it aims to provide a powerful yet manageable option for hunters and sport shooters. The cartridge is a result of advancements in cartridge design and engineering, spotlighting the need for a versatile round that can perform well in various shooting applications.

Key technical characteristics of the .45 Blaser include a bullet diameter of 11.43mm and an overall length that typically ranges from 90mm to 92mm. The case is rimless and tapered, allowing for reliable feeding and extraction, particularly in modern firearm designs. With a case capacity that supports a range of powder loads, the .45 Blaser offers reloaders significant flexibility. The standard chamber pressure is rated at approximately 400 MPa, providing consistent performance across different loads.

Ballistic performance is noteworthy, with the cartridge delivering energy levels suitable for medium to large game at reasonable distances. Typical bullet weights for the .45 Blaser range from 250 grains to 300 grains, accommodating various shooting preferences and applications. This versatility allows it to excel in hunting scenarios, especially for game like deer and boar, as well as in competitive shooting environments where manageable recoil and accuracy are paramount.

For reloaders, the .45 Blaser presents several advantages. The cartridge's design allows for ease in precision handloading, enabling shooters to tailor their loads to specific firearms or hunting applications. Additionally, the availability of reloading components, including various bullet profiles and powders, supports a broad range of handloading strategies. This customization potential makes the .45 Blaser a compelling choice for reloaders seeking to optimize performance for their unique shooting conditions.

Technical Drawing

.45 Blaser cartridge dimensions, C.I.P.L1 = 40.74 mm, L2 = 42.5 mm, L3 = 55 mm, L6 = 68.5 mmL1 = 40.74 mmL2 = 42.50 mmL3 = 55.00 mmL6 = 68.50 mm20.0°

Based on C.I.P., the max. allowed case length is 2.165 in / 55.00 mm, the max. cartridge length is 2.697 in / 68.50 mm, and the max. allowed pressure is 53,664 PSI / 3,700 bar.

Technical Specifications

Maximum Pressure:53664 PSI / 3700 bar
Case Volume:84 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Safety Standard:C.I.P. (Datasheet)
Bore Area:104.94 mm²
Barrel Diameter:0.458" / 11.6 mm
L1:1.604" / 40.74 mm
L2:1.673" / 42.50 mm
L3:2.165" / 55.00 mm
L6:2.697" / 68.50 mm

Start Calculating to Develop your own Load Data for .45 Blaser

Use our professional ballistics calculator to develop safe and accurate load recipes for .45 Blaser.

Start Calculating

Standard Load Data — .45 Blaser

Select your desired cartridge and bullet weight below to access the corresponding load table. From there, you can choose any listed load recipe and transfer it directly into the ballistics calculator for further refinement, optimization, and precision tuning.

A-Square logo

.458 | 500gr | A-Square DeadTough

BC G1: 0.342
80 powders421 loads
Remington logo

.458 | 500gr | Remington FMC RN

BC G1: 0.345
80 powders421 loads
A-Square logo

.458 | 500gr | A-Square MONO RN

BC G1: 0.342
77 powders407 loads
Speer logo

.458 | 400gr | Speer Soft Point Flat Nose

BC G1: 0.259
50 powders266 loads
Alaska Bullet Works logo

.458 | 405gr | Alaska Bullet Works Kodiak FN SPFN

BC G1: 0.251
50 powders254 loads
Barnes logo

.458 | 400gr | Barnes Original FN FB

BC G1: 0.302
45 powders243 loads
CamPro logo

.458 | 405gr | CamPro FCP RNFP

BC G1: 0.284
47 powders238 loads
Alaska Bullet Works logo

.458 | 400gr | Alaska Bullet Works Kodiak RN SPBC

BC G1: 0.29
41 powders205 loads
Hornady logo

.458 | 410gr | Hornady Sub-X

BC G1: 0.285
37 powders196 loads
Speer logo

.458 | 350gr | Speer Hot-Cor

BC G1: 0.232
34 powders188 loads
CamPro logo

.458 | 350gr | CamPro SOCOM

BC G1: 0.237
31 powders180 loads
Swift logo

.458 | 400gr | Swift A-Frame

BC G1: 0.258
33 powders178 loads
Swift logo

.458 | 350gr | Swift A-Frame

BC G1: 0.172
33 powders178 loads
Barnes logo

.458 | 400gr | Barnes Solid RN

BC G1: 0.315
33 powders175 loads
Rhino Bullets logo

.457 | 360gr | Rhino Solid Shank L1.065

BC G1: 0.225
31 powders167 loads
North Fork logo

.458 | 350gr | NorthFork Bonded CoreFN

BC G1: 0.17
31 powders166 loads
Woodleigh logo

.458 | 325gr | Woodleigh HS

27 powders137 loads
North Fork logo

.458 | 350gr | NorthFork Bonded Core

BC G1: 0.19
25 powders132 loads
Winchester logo

.458 | 300gr | Winchester JHP 45-70

BC G1: 0.34
24 powders128 loads
Barnes logo

.458 | 300gr | Barnes TSX FN FB

BC G1: 0.163
23 powders128 loads
Lehigh Defense logo

.458 | 305gr | Lehigh Defense Controlled Fracturing

BC G1: 0.179
21 powders121 loads
Lehigh Defense logo

.458 | 260gr | Lehigh Defense Controlled Fracturing

BC G1: 0.146
20 powders121 loads
Barnes logo

.458 | 300gr | Barnes TSX FB

BC G1: 0.234
22 powders120 loads
Cutting Edge logo

.458 | 300gr | CutEdge ESP Raptor

BC G1: 0.14
22 powders118 loads

Frequently Asked Questions

The maximum pressure for .45 Blaser is 53,664 psi | 3,700 bar.

.45 Blaser typically uses a Large Rifle Magnum (LRM) primer.

The case capacity of .45 Blaser is approximately 84 grains of water (H₂O).